Share:


Elton EWH23R (EH-23) Storage Water Heater Malaysia - Elton 23 Litres (23L) Horizontal Model

RM770.00



Elton Storage Water Heater by South Engineers sdn bhd 



 
1. Stainless Steel Inner Tank:
Made of stainless steel of 1.2mm thickness (AISI 304 2 D) which by far is the most recognised material for it's excellent anti-corrosive properties within atmosphere and water. It carries a five (5) years warranty against leakage due to manufacturer's fault.
2. Mild Steel Inner Tank
Made of anti-rust coated cold rolled mild steel of 2mm thickness and incorporated with Magnesium Anode in it's design to provide an around-theclock protection against corrosion. It carries a three (3) years warraty against leakage due to manufacturer's fault.
3. Magnesium Anode Rod:
Made with magnesium alloy and when the anode is electrically connected to the structure to protect, it makes more negative the electrochemcal potential than the  structure itself. In this way the structure acts as the cathode and the magnesium alloy rod as the anode (therefore, the name magnesium anode). It is used to protect  metallic structures that are in contact with water against corrosion.

4. Heating Element
Made of copper sheathed immersion type that has an electrical rating between 1.5kW- 3.0kW
5. Thermostat c/w electrical cut-off device :
To sense and to monitor the temperature of water in the inner tank between 40° C- 70° C approximately. Besides, it is equiped with a Bimetallic Thermal cut-off  device, also called th third safety, which will be activated to cut off electricity supply should there be any malfunction of the thermostat.

6. Safety Valve cum Non Return Valve :
It has dual functions, one is to guard against excessive pressure built-up in the inner tank above 7.58 bar (11Dpsi), the other is to prevent water from the inner tank to flow back.
7. Wide Range of Capacities :
Both Elton and Ignis water heaters have a wide selection of standard capacities of between 3 gallons - 33 gallons to cater to individual requirements. We can also manufacture according to customers' requirements (tailor-made) to meet specific needs and applications both for domestic and commercial purposes.
8. Easy Installation:
Both Elton and Ignis water heaters, irrespective of capacities, can be easilly installated, whether wall-mounting or floor-mounting, vertical or horizontal version. Its unique design totally eliminates the need for vent pipes.
9. Single I Multiple-Outlets:
Both Elton and Ignis water heaters are stored under pressure, the flow of hot water can be diverted to either single or multiple outlets or at different levels.
10. After Sales Service
Being an established manufacturer 1960's, we are responsible and committed to after-sales service as we realize a product especially electric water heater need not only to meet up with buyers' expectation in quality and safety, the after-sales service is equally, if not more important. Our team of experienced technician is always ready to be on call to serve our customers. This is our commitment.

Notes:
1. Electrical parts cany a one (1) year warranty against manufacture' s defects.
2. All the above important component parts are fully imported.

 
Useful Information                    
Capacity Ambient Heat Up Time Recommended For Net Weight (KG)
Ltrs. Gals. Temp. To 40°C To 45°C To 50°C To 55°C Shower Long Bath Jacuzzi Mild Steel Stainless Steel
  Unladen Laden Unladen Laden
14 3 26°C 9 min 12 min 16 min 19 min Yes X X 11 25 9 23
23 5 26°C 5 min 10 min 13 min 16 min Yes X X 14 37 10 33
32 7 26°C 10 min 14 min 18 min 22 min Yes X X 17 49 13 45
45 10 26°C 15 min 20 min 25 min 30 min Yes Yes X 20 65 16 61
55 12 26°C 18 min 24 min 31 min 37 min Yes Yes X 22 77 18 73
68 15 26°C 22 min 30 min 38 min 46 min Yes Yes X 25 93 20 88
82 18 26°C 27 min 36 min 46 min 55 min Yes Yes Yes 33 115 25 107
100 22 26°C 33 min 44 min 56 min 67 min Yes Yes Yes 37 137 29 129
123 27 26°C 40 min 54 min 69 min 83 min Yes Yes Yes 50 172 33 155
150 33 26°C 49 min 66 min 84 min 101min Yes Yes Yes 57 207 35 185
                           
* Other capacities are also available upon request.   * ( ü ) Recommended   ( X ) Not recommended  
 
 Technical Specification    
  Electrical Loading : 5 Gal. - 33 Gal. / 3.0kW AC 240 / 50Hz
  : 3 Gal. / 2.0kW AC 240 / 50Hz
  Electric Cable : 3 core VCTF
  : 2.0mm² x 3C x 105°C 300/500V (compliance to SIRIM requirement)
  Min. Water Inlet Pressure : 0.17 bar (2.5 psi)
  Max. Water Inlet Pressure : 2.76 bar (40 psi)
  Pipe Size : (1)  15mm (½'') dia. Stainless Steel pipe for Stainless Steel inner tank.
    (2)  15mm (½'') dia. Mild Steel pipe for Mild Steel inner tank.
  Insulation : Fiberglass wool, Thickness : 1'' Density : 1b / ft²
  Water Temperature : Themostatically controlled between 40°C - 70°C approximately. Max. preset temperature at 70°C.
  Thermal cut-off (Third safety) : Bellow 99°C - manually resetable.
  Safety Valve : Pressure release at approximately 7.58 bar (110 psi)
  Tested Pressure : 17.24 bar (250 psi)
  Inner Tank : (1)  Stainless steel AISI 304 2D of 1.2mm thickness.
    (2)  Cold rolled steel JIS G3141 of 2.0mm thickness.
  Outer Casing : Cold rolled steel JIS G3141 of 0.7mm thickness coated with electrostatic epoxy powder.
 
 
1. Stainless Steel Inner Tank:
Made of stainless steel of 1.2mm thickness (AISI 304 2 D) which by far is the most recognised material for it's excellent anti-corrosive properties within atmosphere and water. It carries a five (5) years warranty against leakage due to manufacturer's fault.
2. Mild Steel Inner Tank
Made of anti-rust coated cold rolled mild steel of 2mm thickness and incorporated with Magnesium Anode in it's design to provide an around-theclock protection against corrosion. It carries a three (3) years warraty against leakage due to manufacturer's fault.
3. Magnesium Anode Rod:
Made with magnesium alloy and when the anode is electrically connected to the structure to protect, it makes more negative the electrochemcal potential than the  structure itself. In this way the structure acts as the cathode and the magnesium alloy rod as the anode (therefore, the name magnesium anode). It is used to protect  metallic structures that are in contact with water against corrosion.

4. Heating Element
Made of copper sheathed immersion type that has an electrical rating between 1.5kW- 3.0kW
5. Thermostat c/w electrical cut-off device :
To sense and to monitor the temperature of water in the inner tank between 40° C- 70° C approximately. Besides, it is equiped with a Bimetallic Thermal cut-off  device, also called th third safety, which will be activated to cut off electricity supply should there be any malfunction of the thermostat.

6. Safety Valve cum Non Return Valve :
It has dual functions, one is to guard against excessive pressure built-up in the inner tank above 7.58 bar (11Dpsi), the other is to prevent water from the inner tank to flow back.
7. Wide Range of Capacities :
Both Elton and Ignis water heaters have a wide selection of standard capacities of between 3 gallons - 33 gallons to cater to individual requirements. We can also manufacture according to customers' requirements (tailor-made) to meet specific needs and applications both for domestic and commercial purposes.
8. Easy Installation:
Both Elton and Ignis water heaters, irrespective of capacities, can be easilly installated, whether wall-mounting or floor-mounting, vertical or horizontal version. Its unique design totally eliminates the need for vent pipes.
9. Single I Multiple-Outlets:
Both Elton and Ignis water heaters are stored under pressure, the flow of hot water can be diverted to either single or multiple outlets or at different levels.
10. After Sales Service
Being an established manufacturer 1960's, we are responsible and committed to after-sales service as we realize a product especially electric water heater need not only to meet up with buyers' expectation in quality and safety, the after-sales service is equally, if not more important. Our team of experienced technician is always ready to be on call to serve our customers. This is our commitment.

Notes:
1. Electrical parts cany a one (1) year warranty against manufacture' s defects.
2. All the above important component parts are fully imported.
 

Specifications

Weight(grams): 12000

SKU: Elton EWH 23R (EH-23)

Sorry, currently do not have any video uploaded.
Sorry, currently do not have any file for download.