Ask an Expert.
The best way to find out how much it will cost is to book a Free In Home Solar Quote. Our BWS Expert will recommend the best system for you and provide an obligation free quote.
Which Model/Capacity to choose?
|Usage||Maximum of bathroom|
|L66 x 1||1 ~ 6 people||1 – 4 bathroom|
|L80 x 1||1 ~ 8 people||1 – 6 bathroom|
|L66 x 2||1 ~ 12 people||1 – 9 bathroom|
|L80 x 2||1 ~ 14 people||1 – 11 bathroom|
*The calculation at the left is based on a shower head (6”) and 10 minutes for each person bathing.
*Calculation is for guidelines only, as many factors will affect the result. Eg: time of bathing, weather, water pressure, sizes of shower head.
As a guideline, households with up to 6 people should opt for the 66 gallon models, whereas larger households can either choose the 80 gallon models or to install two or more smaller systems.
Remember that Jacuzzis and bath tubs use a lot of water – factor in about 15 gallon (68l) per use for a regular bath tub.
Where to allocate the solar water heater?
What things to prepare before installation?
What type of roof can install the solar water heater?
Aquasolar hot water system can be mounted at any position, however we will usually recommend that the Solar water heater should be installed at an inclination. We advise you to installation at highest location for optimum heat absorption.
For flat roof installation, an angled aluminium rack should be installed to provide necessary inclination.
What is the basic installation included?
What are the things excluded in the basic installation?
When should I turn on the heating element?
Will I get hot water even on rainy days or nights?
A short period of rainfall will not affect the supply of hot water because AQUASOLAR’s tanks are insulated with 50mm of high-density polyurethane and fiberglass wool to retain heats. On an average, it heats water to about 70oC in the day and loses only about 8% of heat at night. Even if it is overcast, there is enough radiated heat to maintain the temperatures of the water at a comfortable level. However, if there are few days of cloudy day, it would require to switch on the backup heater.
Do I need to install a water pressure Pump for the solar?
All AQUASOLAR™ products are high-pressure systems which means you only need one water pump to drive both cold and hot water throughout the house. AQUASOLAR is not need to have a pump for its circulation through the system.
Our solar system uses Thermosiphon system in heating, when the water is heated it rises. However, we are always recommend customer to purchase a pump for the cold water tank to increase the pressure of cold water for a better enjoyment.
How much do I save?
Appliances with heating elements consume the most electricity in our homes. Using solar water heaters will help you make significant savings when compared to the cost of purchasing, installing and using instant heaters and boilers.
Here is a typical comparison in between instant heater and solar water heater.
|Number of instant heaters||: 4|
|Cost per instant heater||: 350|
|Installation cost||: 150|
|Cost of Purchase||: 4 x (350 + 150) = RM2000|
|Number of persons||: 6|
|Number of showers per day||: 2 per person|
|Average time per shower (min)||: 15|
|Heating element rating||: 3.3kW|
|Electricity tariff||: 0.276kW/Hr|
|Monthly Cost||: 6 person x 2 times x (15/60) hour x 3.3kW x RM 0.276 x 30 days = RM 81.97|
|Yearly Cost||: RM81.97 x 12 months = RM 983.64|
|AQUASOLAR L66 Heater|
|Cost per solar water heater||: 5250|
|Installation cost||: 0|
|Cost of Purchase||: RM 5250|
|Return On Investment (ROI)||: 5250 – 2000 = 3.3 years|