Share:


Aqua Solar L80 + PureGen PGH4-40 Water Pump (Aquasolar With Installation, Puregen Pump Supply ONLY) Purchase with purchase Waterco/ puregen Outdoor Filter with promotion price

RM6,688.00



We will send you a notification as soon as this product is available again.


Aquasolar L80 Solar Water Heater Malaysia (363 liters) with installation

L80 Technical Informations & Specifications

The L Series is suitable :
Residential / Commericial which requires :
• High temperature, mid efficiency
• Robust installation

FOR USAGE 8 TO 9 PEOPLE
 

L SERIES L80
Warranty 9 Years Warranty + 1 Year Guarantee
OVERALL DIMENSION  
Tank Capacity 80 Gallons (UK) 363 Litres
Overall Dimension (L x W x Di) 2438mm x 2438mm x 584mm
Weight – Full 574kg
Weight – Empty 224kg
STORAGE TANK  
Tank Dimension 2134mm x 584mm
Outer Casing Stucco Aluminium
Storage Tank Insulation 50mm High Density Polyurethane Foam (CFC Free)
Cylinder Material Marine Grade Stainless Steel
Nominal Working Pressure 750 kPa
Test Pressure 1500 kPa
Relief Valve Setting 850 kPa / 99°C
Laminar Flow Stratifier Yes
Electric Booster 3 kW
SOLAR COLLECTORS  
Number Of panel 3
Surface Area (L x W) 1820mm x 2438mm
Number Of Riser Tubes 24
Method Plate and Tubes
Collector Panel Matt Black Aluminium / Copper
Casing Material Aluminium
Glass Material Tempered Glass
Efficiency > 85%

 

icon1Designed to Meet Local Requirement :
A range of 66 & 80 gallon models to suit your needs

Retain Heats :
50mm High density polyurethane foam to maximum heat retention.

Top Quality Material : 
High quality corrosion-free material such as stainless steel, copper and aluminum to ensure long life and performance.

Proven Safe :
About 70°C and safety feature of relief valve controls the heat pressures.

Back Up Heater : 
To ensure hot water during raining season or over usage.

Number of Riser Tubes : 
More tubes in the panel to ensure fast heating and optimum flow rate leading to higher efficiency and effectiveness.

 


 

Design

AQUASOLAR SOLAR WATER HEATING SYSTEM

 

EVERY HOME and family needs clean water – this daily essential is central to our contemporary lifestyle and its demands. Yet the delicate state of our environment today means that it is increasingly important that we use energy in a responsible and efficient manner. The average household uses 116,800 litres of hot water a year.

AQUASOLAR TM Water Heating Systems delivers the convenience of hot water on demand with the use of solar energy. Besides being good for the environment, AQUASOLAR TM can help you save up a substantial part of your energy bill too. Discover today how its modern, efficient design can take care of your heated water needs for years to come.

* Water consumption facts derived from Ministry of Natural Resources and Environment, Malaysia. Based on an average family of four persons.

Aquasolar-04

ENSURE THE QUALITY OF PRODUCTION

Each AQUASOLARTM product features high quality aluminium, copper and stainless steel construction that offers years of trouble-free ownership and usage.

Each AQUASOLARTM water heating system comes with two collector panels – each with 10 copper risers paired with 2.97m2 of collector fins with selective black coating for optimal heat conversion and performance-to-weight ratio.

Hot water is stored in a marine-grade 316L steel storage tank, which requires no sacrificial anodes to replace or rust and cracks to worry about. 316L steel tanks offer superior performance over industry standard 304 steel tanks.

All AQUASOLARTM products are designed to perform under high-pressure. High pressure solar heaters do not create a loss of pressure when water passes through it, which means homes using such systems only require one water pressure pump. On the other hand, low-pressure systems require one water pump for the cold water and another for the hot water.

THE THERMOSIPHON PRINCIPLE

 

AQUASOLARTM products rely on the thermosiphon principle to drive water through its system. Thermosiphon occurs when heated liquid rises and is replaced by cooler liquid in a closed circuit. As the cycle is repeated, the temperature of the liquid in the entire system is gradually raised.

Because there are no pumps or motors, AQUASOLARTM products are cost-effective to own, use and maintain.

Aquasolar-05-300x270
 

 

PureGen PGH4-40 Water Booster Pump 

Brand: PUREGEN
Model: PGH4-40 
Type: Pressure Controlled Water Pump
Hose power: 1.0hp
Warranty: 2 years 
Supply for : 5-6 bathrooms usage

5S Features Smart A distinctive and reliable controller to start-stop the pump smartly and quietly deliver the water pressure.
Silence Its design with its distinguished and innovative technology to complete the pump with extremely quiet in operation.
Stylish Designed with advance technology with stainless steel materials.
Superior Pump is manufactured according to world class standard and stringent PureGen quality programme.
Simple Easy to install and operate, actual settings are clearly indicated by indicator lights on user friendly control panel.

 

Quality
PureGen works with the NSF, and the WQA to ensure the highest quality and safest products. Many of our products are certified to the toughest industry standards. Our NSF series R.O. systems are certified to NSF / ANSI Standard 58.

Value
PureGen has been a leader in providing water treatment systems and components for over 15 years. With a diverse and growing product line of products made in the USA and overseas, we are able to provide you with the quality and pricing you need to be competitive in today’s challenging market.

PureGen Water Pump Specifications
 
Special Innovation

  • Electronic Pressure Control
  • Automatic start / stop control
  • Dry run protection
  • Stainless Steel 304 Pump Housing with stand rust and rupture
  • Stainless Steel  316 Impellers for higher efficiency impellers design
  • Able to withstand high dynamic stresses


Motor

  • High efficiency and performance
  • Quiet operation

Specifications

SKU: Aquasolar L80 Puregen PGH 4-40

Sorry, currently do not have any video uploaded.
Sorry, currently do not have any file for download.